intelli-flav® CLS 3
Deliver consistent seasoning application every time with the tna intelli-flav® CLS 3. This flavour spray system is specifically designed for raw powder and oil slurry combinations.
Small line to pack potatoes
In this example of a small line to pack potatoes (5 ton per hour), produce can be received onto an Elevator where they are fed into a Horizontal Debris Remover, to remove loose dirt, vine, and other debris.
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Reverse box tipper
When an empty box is put in its place box will tip at an angle. While the box is filled he slowly tips back. This way of filling minimizes the product damage.
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
STRATA Invicta®
The STRATA Invicta sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.
Primary Oil Filter
The Primary Oil Filter filters the oil of an entire frying system, making sure the oil is clean and crumb-free. With the very narrow pass, the POF provides a better result than most other filters installed in this part of a processing line.
Steam Peeler
The Tummers Steam Peeler (TSP) is specially designed to offer an excellent peeling result with higher batch loads. At a low steam consumption, this machine offers a higher capacity than any other steam peeler available.
WeighGuard®
The WeighGuard® is an advanced system for dosing and weighing flavourings and additives that takes into account the line capacity
intelli-spin® 700 series
The Arcall intelli-spin® 700 series uses advanced spinning disc technology to provide accurate and consistent liquid and slurry application.
quik-coat® RD 5
The tna quik-coat® RD 5 has a grooved roller that ensures a consistent application of the ingredient cross band up to 1500 mm (59”). The roller and hopper can be removed for cleaning and quick product changes.
Sponsored Content
You May Also Like
Comitrol® Processor 3640A
The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.
Box tipper
Box tippers are designed to feed processing lines or machines. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Abrasive type peeler
The abrasive peeler excels in its simplicity, efficiency and minimum footprint, guaranteeing smooth and clean results every time. Ideal for potato chips lines and other small scale potato processing lines.
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
Box Transport Unit
Allround box transport units are designed to speed up the process of box transport and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
