Sponsor of the month(Learn more)
KnifeGuard®
Kiremko KnifeGuard is an innovative knife identification system specifically designed for the Quadra Invicta hydro cutter. As the knife blocks and matching alignment tubes in this system are monitored and maintained each day, valuable process information can be obtained.
Flo-Cut® Model 360 Watergun Cutting Head
The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.
Grader-Halver
A cost-effective solution designed to consistently grade potatoes according to size then halve any that are larger than the predetermined size.
Comitrol® Processor Model 2100
This machine is used for reducing into flakes or granulation for further processing.
Fin Aligner
The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.
M VersaPro® Dicer
The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Hydro-cutting lines
Tummers Food Processing Solutions is the biggest player in hydro cutting technology in Europe. An extensive range of typical Tummers Food Processing Solutions standard equipment is available, while layout and details are custom designed.
ADR EXOS™
Key’s Automatic Defect Removal System (ADR) is a unique system that turns a defective potato strip into a good one by automatically identifying and removing flaw areas.
Diversa Cut 2110 A Dicers
The DiversaCut 2110A® Dicer offers a turnkey approach to processors. Available in 3 different models: DiversaCut 2110A Standard Dicer, NEW DiversaCut 2110A with Conveyor Discharge, and DiversaCut 2110A (LPI) Large Product Input.
Model VSC Segment Cutter
The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.
Comitrol® Processor Models 3600F - 3640F
This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
Comitrol® Processor Models 3600 - 3675SL
Shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects.
Sprint 2® Dicers
Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.
Quadra Invicta
Quadra Invicta’s many benefits range from fantastic results on French fries, wedges, and slices, to easy operation and user-friendliness. With an exchanger, the knife block can also be changed in minutes, ensuring great quality and a stable process.
conti-cut
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Cutting line Switcher
Tummers Cutting line Switcher is a stainless steel, industrial switcher for changing cutting blocks either automatically or manually, and without interrupting your production. They can be Operated with a front-mounted touch screen.
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.