ultra-peel® SKC 3
Florigo ultra-peel® SKC 3 is an abrasive peeler that operates in batches, weighing your product, to ensure optimized peeling results from small, medium and large potatoes for the production of potato chips.
WeighGuard®
The WeighGuard® is an advanced system for dosing and weighing flavourings and additives that takes into account the line capacity
Air dryer
The Allround Air dryer is designed to use a high-powered fan to remove water from the product. With the web belt, the water goes through the web and can be collected in a gutter or bin.
Flo-Cool® ROCS
Flo-Cool® ROCS The latest Flo-Cool® system pumps oil through a HX system–to rapidly cool frying oil for storage in a day/over nigh tank–resulting in faster clean-down/change overtimes.
Hoppers
Allround hoppers are designed to feed machines or product lines or act as a buffer in a processing line. The hopper is designed to work with cubic boxes and big bags.
Hermes Flavour Liquids and Solids system
Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
CCW-RV Open Frame Weigher
Ishida’s latest IP69K waterproof weigher is now fully open for cleaning.
intelli-spin® 100 series
Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.
Flat Bed Brusher
Wyma Flat Bed Brusher systems are made up of individual 10 or 15-row modules bolted together to make a customized combination system. Each shaft can be fitted with your choice of brush or drying rollers.
Cyclone Destoner
Wyma's Cyclone Destoner gently separates stones from produce. Produce and stones are fed into a moving well of water in the Cyclone Destoner cone.
conti-pro® FF 3
Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
Sponsored Content
You May Also Like
Combi-System
Our Combi-System combines a Tank Destoner, Barrel Washer and Floating Debris Remover. Produce and stones are fed into the Tank Destoner.
FastBack 4.0 Horizontal Motion Conveyor
FastBack 4.0 is a circular to linear drive horizontal motion conveyor, a new solution in horizontal motion conveying. It is the culmination of more than 10 years development and multiple international patents.
Box Fillers
Allround box fillers are designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the fall height is reduced as much as possible.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Flo-Cut® Sizer-Halver
Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Horizontal Box Filler
Allround Horizontal Box Filler is designed to fill boxes of various sizes in the most product-friendly way possible. The machines are designed in such a way that the product damage is reduced as much as possible and to fill the box completely from sides as well.
