产品

Wyma's Tank Destoner provides gentle stone and clod separation from produce prior to washing and reinspection cycles. Produce, stones and debris enter the water-filled tank, where a water jet directs the movement of produce towards the outfeed.

Tummers Food Processing Solutions has exclusive marketing rights to product pumps for processing potatoes, vegetables, and fruit. Their fresh produce pumps will pump your product without damaging it.

This line is designed to wash industrial potatoes. The principle is that a box is placed in the machine, which then slowly tilts the box so that a hopper or elevator is filled.

TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines

Wyma's Creep Feed Hopper receives, stores, and conveys dirty produce that has a high level of dirt and clods. Wyma's Creep Feed Hopper is a dry hopper. It receives wet or dry produce with a high level of dirt and clods, allows for fast unloading and changeover time without starving your line of produce, and provides produce buffering.

Tummers Washing Line Roller Dryer ensures that after washing and destoning the moisture still present is removed from the potatoes or tubers without affecting the product characteristics.

Allround box transport units are designed to speed up the process of box transport and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.

The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.

Hermes is a piece of equipment designed for large-scale production due to its robustness and size allows to apply powdered liquids, flavors and salt simultaneously.

Wyma’s Belt Inspection Conveyor is designed for manual inspection of produce.

Flo-Mech's Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers

Steam peeling is the most efficient way to peel potatoes, but the emission causes a loss of energy. The E²E-Condenser saves energy by condensing the emission and using the water for other purposes that take place further in the process.

The action continues under the fryer hood as the slices move down inside the fryer. In most systems in Europe the oil is heated by an incinerator (such as the Flo-Therm™ heater).

Flo-Mech offers a range of intake and storage systems from smaller capacities all the way up to large systems with multiple infeed and storage bins. They can tailor solutions to your needs.

Kiremko KnifeGuard is an innovative knife identification system specifically designed for the Quadra Invicta hydro cutter. As the knife blocks and matching alignment tubes in this system are monitored and maintained each day, valuable process information can be obtained.

Ishida, recognized as a dominant bagmaker manufacturer in the high-speed operation range with their industry leading Atlas series, continues to break ground with their INSPIRA Snack Bagmaker VFFS series.

Flo-Cool® ROCS The latest Flo-Cool® system pumps oil through a HX system–to rapidly cool frying oil for storage in a day/over nigh tank–resulting in faster clean-down/change overtimes.

The tna quik-coat® RD 5 has a grooved roller that ensures a consistent application of the ingredient cross band up to 1500 mm (59”). The roller and hopper can be removed for cleaning and quick product changes.