Producten

Tummers Washing line Destoner/Washer unit is a stainless steel machine combination for destoning and washing potatoes and tubers that was developed for 24/7 industrial use. Optionally the machine can be set up to separate floating parts (foliage and stalks) from your product.

Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.

Kiremko KnifeGuard is an innovative knife identification system specifically designed for the Quadra Invicta hydro cutter. As the knife blocks and matching alignment tubes in this system are monitored and maintained each day, valuable process information can be obtained.

The Arcall intelli-spin® 700 series uses advanced spinning disc technology to provide accurate and consistent liquid and slurry application.

Flo Mech Pumping systems is designed to gently transfer product from A to B

The Odyssey steam peeler incorporates TOMRA's control software, an enlarged steam peeling vessel, and a weigh hopper.

Idaho Steel is active worldwide in designing, producing and installing complete processing lines, factory upgrades and individual machines for potato specialties.

The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out

The Flo-Flavour™ plus systems have been designed to apply powder and oil (if required) separately to products that do not need a slurry based flavour that soaks in. The systems are used for other snacks products like fried snacks.

The Allround Big-bag filler is designed to fill big bags continuously in the most gentle way possible. This is achieved by a fall damping system which automatically goes up as soon as the level of product in the big bag requires.

Storage in bulk is an effective and economical way of storage. Effective because it is a direct ventilation system what means that 100% of the air distribution coming from the fan is forced to pass the product.

Flo-Mech Flo-Therm® G4 SX Oil Heater is a Direct Oil Heating Systems with Pollution Control

The FastBack Left Right Center (LRC) is a compact double multihead weigher feed solution designed to provide a precise, consistent product stream to Ishida's patented back-to-back 218 twin weigher.

Florigo conti-pro® FF 3 is a French fries frying system designed with a process intended to boost the efficiency of your production line.

tna quik-coat® MD 5 is the ultimate mandrel dispensing unit that applies a variety of free flowing ingredients consistently onto the top of products passing underneath. The tna quik-coat® MD 5 is custom configured for width and ingredients.

The STRATA Invicta sets the new standard in steam peeling systems, offering the highest yield at the shortest possible cycle times.

Elea offers a trial batch system capable of treating solids and liquids for scientific and pilot scale applications with up to 10 L treatment volume.

Corona® process from ZEISS is all the spectrometer you’ll ever need. With its extended wavelength range of 380 to 1,650 nm, it can determine ingredients and true color values simultaneously without additional filters