Filter System
The Allround Filter system is designed to take out loose skin and dirt. Filtration is the separation of solids from the product by means of a filter belt, which retains the solids and allows the liquid to pass through.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
Washing line Destoner/Washer unit
Tummers Washing line Destoner/Washer unit is a stainless steel machine combination for destoning and washing potatoes and tubers that was developed for 24/7 industrial use. Optionally the machine can be set up to separate floating parts (foliage and stalks) from your product.
Air dryer
The Allround Air dryer is designed to use a high-powered fan to remove water from the product. With the web belt, the water goes through the web and can be collected in a gutter or bin.
Storage Hoppers
The Allround Storage Hoppers are designed to act as a buffer in a processing line or between a processing line and a packing line. The Storage Hoppers are designed to be built in segments.
intelli-flav® CLO 3
The tna intelli-flav® CLO 3 oil and flavour spray system enables the accurate application of oil and injected flavour – or just oil – requiring no mixing tanks and leaving minimal flavour residue.
Contenido Patrocinado
Contenido Patrocinado
Contenido Patrocinado
Contenido Patrocinado
robag® 3e FX series
tna robag® FX series is a vertical, form, fill and seal (VFFS) packaging solution with speeds up to 250 bags per minute using rotary triple, double, single or flat jaw configurations to package a variety of bag types.
Vibrating Piece Remover
Wyma's Vibrating Piece Remover removes unwanted produce pieces and debris early in your processing line and prior to packaging. Produce and debris are fed ontothe bed, which is made up of corrugated channels.
Water Treatment (Solids Removal)
Solids handling system designed to work in conjunction with washing or other solid saturated water systems. This system can be sized and implemented to produce clean recirculated water where solids removal is required.
Flo-Therm® G4 PC Oil Heater
Flo-Mech Flo-Cut® Sizer-Halver is a Potato Grading System, with a Halving Section for Oversized Tubers
Herb Potato Patty
These are the nuclei component of the famous fast food, Burgers. They, at IBF just don’t leave it to the salads and sauce combinations to do the taste bud tickling in a burger.
Octal Conveyors & Elevators
Los transportadores y elevadores Octal de Wyma transportan eficazmente los productos a las diferentes partes de su línea. El transportador o elevador reciben las hortalizas y las transportan en la dirección del movimiento de la cinta.
Contenido Patrocinado
También te puede interesar
conti-pro® PC 3
Designed especially for potato chips, the tna conti-proPC 3 is a high-performance continuous frying system.
Accumulation Trays
GoSync Vibradores optimiza las regulaciones de flujo del producto y homogeneizamos el caudal, utilizando
tolvas de acumulación según sea necesario.
tolvas de acumulación según sea necesario.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Diversa Cut 2110 A Dicers
The DiversaCut 2110A® Dicer offers a turnkey approach to processors. Available in 3 different models: DiversaCut 2110A Standard Dicer, NEW DiversaCut 2110A with Conveyor Discharge, and DiversaCut 2110A (LPI) Large Product Input.
VFFS rotary polyethylene packaging system robag® FXIS
tna robag® FXIS is a solution for packaging applications such as fresh produce and confectionery using polyethylene (PE) film.
DiversaCut Sprint® Dicer
The DiversaCut Sprint® Dicer is a high performance dicer designed to uniformly dice, strip cut, and slice a wide variety of vegetables, fruits, and meats. Efficiency and flexibility are key traits of the Sprint®.
