加工设备

The Rosenqvists Nut frying systems are suitable for all types of nuts and seeds. The fryer is excellent for coated nuts. Depending on the final product, the frying system is equipped with a suitable type of belt

The tna intelli-weigh® alpha advance series of multi-head weighers is a simple, affordable weighing solution that does not compromise performance or efficiency.

The tna quik-coat® MLS 3 is a volumetric main-line seasoning (MLS) system that continuously and accurately coats a variety of snacks products moving at a fixed rate through the production line.

This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.

The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.

TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines

​​​​​​​​The Allround Fixed roller sets are designed to take out loose skin and dirt. This raises the capacity of the line and reduces the amount of dirt in the other machines and is the most gentle and efficient way of pre-cleaning.

Cutting blocks by Tummers Food Processing Solutions are known for their perfect cutting quality and long service life. They are designed for all possible methods of cutting: French fries, slices, wedges, crinkle-cut French fries, sticks, and coring.

The Flo-Dry system is a natural gas-fired, Single or Triple pass oven-dryer designed to evaporate moisture from extruded snacks and other products. These are typically receiving the product at the inlet at around 9-10% (exit extruder) and outputting the product at 1-2%.

Flo-Mech Rinsing / Washing systems design for removing surface starch. Flo-Mech offer a range of solutions to remove surface starch from peeled / cut potatoes before the next stag of the process.

Wyma’s Roller Inspection Table is for manually inspecting produce. Multiple sizes are available.

The Flo-Grade™ has been developed to be installed with our Flo-Cut™ sizer halver unit or on its own as a stand-alone potato or tuber grader. It has a tapered screw design for gentle grading and transfer of potatoes.

Wyma Flume Conveyors provide a very low maintenance, hygienic option for transporting produce over long distances and around corners to one, or many destinations using flow dividers to control produce flow.

Arcall intelli-spin® 100 series is a cantilever spray system that uses spinning disc technology to provide accurate and consistent liquid and slurry application.

Wyma Web Conveyor & Elevator belts are made with rubber-coated steel bars. Gaps between the bars allow debris or water to fall through the belt, separating it from produce flow.

Florigo ultra-peel® SKC 3 is an abrasive peeler that operates in batches, weighing your product, to ensure optimized peeling results from small, medium and large potatoes for the production of potato chips.

A simple, yet sophisticated promotional strip pack applicator – the tna trenza® – features precision strip cutting and automatic bag counting and hole punching, for the seamless application of hanging strips to a variety of bag formats and sizes.

Wyma's Bunker is a dry hopper. It receives and stores produce for automatic, controlled delivery to your processing line. Each Bunker can hold up to 50t of produce with small amounts of dirt and clods.