Frozen French Fries Plant
Manufacturing the French fries and the frozen French fry do not have much difference. It differs only in the final part of frying and freezing. The frozen French fries take lesser time to fry than the fresh French fries.
conti-cut hydro cutting system
TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines
Inspection unit in cabin
The Allround Cabin inspection is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Herbed Potato Wedges
When your bite demands flavoursome chunkiness in a fry, nothing but their Herbed Potato Wedges would satiate your craving.
Series 1750 Flush Grid Belt
The new Intralox® Series 1750 Flush Grid belt takes abrasion resistance to a new level. It is a superior solution for use in the harsh conditions wet (potato) receiving lines.
conti-pro® PEL 3
Florigo conti-pro® PEL 3 is a pellet and specialty products frying system handling a wide range of pellet shapes and product shapes using a highly efficient frying process.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Model CC Slicer
Food processors rely on the Urschel Model CC (MCC) to produce precise, uniform slices, strips cuts, shreds, and granules at high production capabilities with excellent results.
Batch Frying (& Oil Heating)
Flo-Mech offers Batch Fryers for chips in a range of sizes from 120 kg per hour. • For hand cooked, hard bite, kettle style crisps
Peeling line Delta Roller Spreader
The Tummers Peeling Line Delta Roller Spreader has specially been developed for gentle transport to a wider product flow. This machine is commonly used to feed potatoes from the outfeed of a screw conveyor to a wide sorter, but is suitable for a wide variety of food products.
Steam Peeler
The Tummers Steam Peeler (TSP) is specially designed to offer an excellent peeling result with higher batch loads. At a low steam consumption, this machine offers a higher capacity than any other steam peeler available.
ener-freeze® FFV 3
Ferguson ener-freeze® FFV 3 is a cooling and freezing solution with innovative air flow distribution technology to evenly freeze various potato products and shapes.
Affinity® CD-L Dicer
The new Affinity® CD-L Dicer produces uniform dices in the small to intermediate size range. The CD-L combines the utility of Urschel Models CD-A and L-A, plus working design elements from the Affinity Integra® Dicer.
Sponsored Content
You May Also Like
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Horizontal Soil Remover
Wyma's Horizontal Soil Remover removes dirt, roots, and other debris from potatoes. Potatoes and debris are fed onto a belt with rubber pintles. Potatoes are carried forward and directed to the outfeed chute by the powered sweep roller.
Sorting and Grading Lines
NSSPL sorting and grading lines are the most advanced sorting and grading lines for fruits and vegetables by sorting them by size, color, and weight. NSSPL also offers a washing treatment line
Belt Inspection Table
Wyma's Belt Inspection Table conveys produce for manual and visual inspection. If produce is very dirty, an optional web belt can allow dirt, debris and water to fall through so they are not carried further down the processing line.
Model CCL Lattice Potato Chip Slicer
The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.
intelli-flav® CLS 5
Featuring an innovative under-surface mixing design, the tna intelli-flav® CLS 5 is ideal for creating a homogenous slurry mix for use on extruded and other dry snacks.
