Find Industrial Cutting systems

Heat and Control Fastlane infeed conveyors offer Easy, safe and cost-effective delivery of a singulated stream of potatoes to multiple slicers.

The FAM Centris is perfect for centrifugal slicing of potato and vegetable chips. Tested and in production since 2015, the line has an ever-expanding range of blades in all shapes and sizes.

TNA conti-cut hydro cutting system is the new, cutting-edge solution in french fries processing. Universally compatible with all potato processing lines

Sprint 2® Potato Dicer - 1/8 to 1" (1.6 to 25.4 mm) dices and pieces such as 1/8 x 1 x 1/8" (3.2 x 25.4 x 3.2 mm) from cooked product. Input product dimension should not exceed 6.5" (165.1 mm) in any dimension.

The slicer of Idaho Steel is used to size potatoes for processing. By slicing the whole potato, blanching time and product waste are reduced.

The Urschel MicroAdjustable® Slicing Head (SL-14) offers maximum cutting action and expedient knife changeovers for your potato chips production line.

The M VersaPro® (MVP) Dicer provides the best in sanitary design and the ultimate in versatile cutting of proteins. The MVP offers 33% increased feeding capacity versus the standard M6 due to wider belts, optimized cutting, and increased horsepower. 

The 3640A is ideal for processing tough or fibrous products in small volume to high-capacity production environments. Equipped with VFDs (variable frequency drives) on both the impeller motor and the screw feeder motor, this allows increased speeds to be achieved for greater processing versatility.

SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.

The Model VSC produces a wide range of segments, slabs, or rectangular strips. Several different cutting set-ups are available including standard heads, Flo-Cut® Model 360 heads, and Velocicut® heads. Consult your local Urschel sales representative for the cutting head best-suited for our application.

The Flo-Cut® Model 360 cutting head is designed for use in large volume watergun systems, or with the Urschel Model VSC Cutter. This unit can be integrated into watergun systems and offers fast, easy cutting head replacement for changing knives or sizes of cuts.

The DM380 is ideal for processing nuts in small batches or high-volume continuous production. The unique disc plate design and adjustable gap setting allow for a wide variety of nuts to be processed.

This machine is used for reducing into flakes or granulation for further processing.

The Velocicut® Head may be used in conjunction with the Urschel Model VSC Cutter, or integrated into an existing watergun system. A variety of cuts may be produced including square, rectangular, slab, bi-slab, cross slab, and segment cuts.

It is recommended for free-flowing dry and semi-dry applications. ​ For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.

This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.

The patented Tummers Food Processing Solutions Aligner for cutting potatoes and tubers can be incorporated into any water-cutting system. The aligner ensures that a tuber is perfectly centered and aligned for cutting.

The Model CCL slicer produces lattice cuts of varying thickness. Both sides of the slice have crinkles, with the crinkles on each side of the slice running approximately 90° to each other. Uses involve lattice potato chips and thicker potato waffle fries.