Find the right Processing Equipment

NSSPL Freeze Dryers are designed with the latest technologies and high-quality equipment that ensures its performance with consistency. It ensures the aroma and taste of the foods

Rosenqvists Food Technologies have designed the Multi-Zone Chips Fryer to give the final product the desired characteristics, for optimal control of the frying process.

Protect your brand’s reputation with the tna hyper-detect® 5. This high-performance food metal detector system is uniquely designed to sit as close as possible to the multi-head weigher, significantly increasing bagging speed without compromising food safety.

Corona® extreme from ZEISS is the most robust spectrometer on the market. It doesn’t matter if it’s extremely hot, cold, or there are high levels of shock, vibration, dust or debris, Corona® extreme provides full-scale spectrometer measurement

Tummers Food Processing Solutions has built up extensive knowledge of potatoes as a raw material and the best methods for processing them.

Flo-Mech Flavour Drum infeed vibrator has a stainless steel pan and reaction base. The stainless steel pan has an integrated quick release fines screen. Housed on a support frame.

Wyma’s Wet Hopper is a cost effective, multi-purpose, pre-washing system, designed to remove excess mud, dirt and sand from produce without causing damage.

Allround Mobile washer PD 500 washing machine is designed for cleaning produce. After the produce falls into the water it floats to a rotating drum. While the produce floats, stones and dirt sink to a waste belt at the back of the machine.

Tummers Continuous sorter is an industrial stainless steel machine for custom sorting of potatoes and tubers. The machine is directly adjustable, which means that production can continue while adjusting the settings.

This Model is used for shred for hashbrowns. 1/16 to 3/8" (1.6 to 9.5 mm) particles for potato pancakes or rösti from dicing and french fry screenings and rejects. Use cutting head with suitable particle opening size. Capacity is 4,000 - 5,000 lbs. (1,800 - 2,200 kg) hourly using 3,600 revolutions per minute impeller speed.

Optimal storage conditions can only be achieved with the help of accurate sensors. Allround produces its temperature sensors in their own factory where they are produced under optimal conditions

tna robag® FX 3e is a high-performance vertical form fill and seal (VFFS) packaging system that delivers the fastest speeds in the industry and the latest in automation with real-time EtherCAT® protocol.

Horizontal Debris Remover removes dirt, roots and other debris from potatoes.

Wyma's Floating Debris Remover removes unwanted buoyant debris from the Wyma Wet Hopper.

The TranSlicer 2510 Cutter accepts compressible food products up to 8" (203 mm) in diameter, or firm products up to 6-3/4" (171 mm) in diameter — precutting may be necessary. Optional static hold-down assembly is available to maintain positive feeding assistance.

SFW Hydrocutter is a piece of industrial food processing equipment that uses high-pressure water jets to cut and slice food products. The hydrocutter consists of a pump, a high-pressure water system, and a cutting head.

Flo-Mech Flo-Wash® submerged barrel washing system ensures a clean product, ready for further processing.

The Comitrol® Processor Model 3640A High Speed (M3640A-HS) is ideal for processing tough or fibrous products in small volume to high capacity production environments.