Reverse box tipper
When an empty box is put in its place box will tip at an angle. While the box is filled he slowly tips back. This way of filling minimizes the product damage.
Box Unstacker
Allround box unstacker is designed to speed up the process of unstacking and can be easily added to existing lines. This process provides a logistic advantage by reducing forklift movements.
TranSlicer® 2520 Cutter
The 2520 takes the design of the TranSlicer 2510 to the next level. Every facet of the machine focuses on timesaving, therefore cost-saving, sanitation practices.
Fans
Fans are an integral part of the storage system, and therefore it is very important the proper type of fans are chosen for the right application. Furthermore, fans should be reliable and able to work under difficult
Peeling line
Tummers peeling lines for the peeling and after-washing of potatoes and tubers are developed with the purpose of high-quality end product and minimal skin loss.
Box Storage
With Allround box storage the products are stored in large bins. The product is stacked up to about 6 boxes high. Box storage is a very flexible way to store agricultural products.
Sponsored Content
Sponsored Content
Sponsored Content
Sponsored Content
Inspection unit in belt
The Allround Belt inspection table is used for manual sorting of the waste between the products. It allows you to pick out the rotten products and other waste, which can be disposed of onto the waste belt between the two belts.
Skin Separator
The Allround skin separator is designed to remove floating pieces from the produce. This could be for example loose pieces of skin or branches and leaves. The machine works on the principle that the product is heavier than the pieces that are to be taken out
intelli-flav® OMS 5.1
The tna intelli-flav® OMS 5.1 is a next-generation on-machine seasoning (OMS) system that provides both powder flavouring and liquid oil in a single drum, to deliver consistent coverage and flavour to a variety of products.
Pulsemaster Compact PEF system
Pulsemaster Compact PEF system is a robust, all-in-one unit with a small footprint, which is designed to suit small and mid-scale production lines. The Compact PEF system is easy to install in a production line, quick to start up and has low energy and water requirements. This Compact PEF system can process up to an impressive 10 tons per hour at PEF.
Shake grading line SG80 series
Shake Grading line sg80 series hand feed inspection on the roller inspection table
Potato Scoops
Iscon Balaji's Potato Scoops are curvy, chiselled into scoops that are perfect for dip dunking. Crafted to retain hold time, potato scoops remain crisp so that these could be relished at ease with the choicest dips or sauces without any mess on the plate. IBF Potato Scoops are perfect accompaniment to soups and cocktails.
Sponsored Content
You May Also Like
FLO-STARCH® Starch and Water Recovery System
FLO-STARCH® Starch and Water Recovery System separates starch from process water and deposits the starch in large bags for re-sale or re-use.
Flo-Filter® Oil
Flo-Mech Flo-Filter® Oil: Continuous Frying Oil Filtration (& Management)
Web Conveyors & Elevators
Wyma Web Conveyor & Elevator belts are made with rubber-coated steel bars. Gaps between the bars allow debris or water to fall through the belt, separating it from produce flow.
Shake Grading line SG80 series
The Allround Shake grader is designed to grade potatoes according to their square size. The potatoes are fed to the top of the machine onto the top sieve. The sieves in the machine shake in sequential frequencies, which causes the potatoes to move along on the sieves.
Cold Storage Solution
NSSPL cold storages are designed with the latest technologies keeping local climatic conditions into consideration. NSSPL builds Temperature Controlled Cold Storage
Comitrol® Processor Model 1700
It is recommended for free-flowing dry and semi-dry applications. For the size reduction of potato flakes a Model 1700 or 3600 can be used. Use cutting heads at 3,000 rpm or microcut heads with every other blade removed at 9,000 rpm or with VFD to make a particle size of 200 to 800 microns.
